For low voltage
Product Lineup of Voltage Detector
- The following is our product lineup.
Leaflets with detailed specifications of each product are attached to each product section for your reference.
- ※Click here for comparison materials.
Type:HTE-610 Low Voltage Detector
- AC 50V〜600V (50Hz/60Hz)
- Audio-signaling and light emitting
- AC Non-Contact Voltage Tester
- The sensitivity for operation is adjustable
- Battery: LR44(1.5v) × 2 pcs
- HTE-610 Flyer
The service of insarting name and logo for gift
- We provide the service of insarting name and logo
for gift and souvenir. - The target model is HTE-610 series, and the
minimum lot is 100 units. - If you need for details such as quotes,
please consult with our distributors or our sales
division.
Type:HTE-610L-R Low Voltage Detector
- AC 50V～600V (50Hz/60Hz)
- Audio-signaling and light emitting
- AC Non-Contact Voltage Tester
- The sensitivity for operation is adjustable
- Battery: LR44(1.5v) × 2 pcs
- HTE-610L-R Flyer
Type:HTE-700D/700DL Low voltage detector
- The New release equipped waterproof
as a successor of HT-680 Series
- Working voltage range
・AC50～600V / DC12～750V - Waterproof equivalent to IPX4
(protection against splashes)
- Contact tip made of Conductive resin
- Short circuit prevention. Conductivity is
not easily lost.
- Only for bare wire
(Can be used for bare conductor wire only.
Can not be used for insulated conductor wire.)
- Battery: AAA battery(R03 / LR03 / 1.5V)×1pce
＊Can not use rechargeable battery. - HTE-700D/700DL Flyer
Type:HT-670 Low Voltage Detector
- Working Voltage Range:
AC 50V〜600V (50Hz/60Hz) / DC 50V〜600V - Audio-signaling and light emitting
- Sencitivity switch-over by slider switch depending
on the detection.
(bare conductor/insulated conductor) - Option: Grounding wire(DF01027)
- Optional grounding wire can be used for below.
- ・Voltage discrimination function(100V/200V).
- ・Prevents unnecessary detection due to reverse
induction voltage.
(Grounding wire should be contacted to grounded metal.) - Battery: LR44(1.5V) × 2 pcs
- HT-670 Flyer
For high to low voltage
Type:HSF-7 High and Low Voltage Detector
- Working Voltage Range: AC 80V〜7000V (50Hz/60Hz)
- The function of identification the medium voltage
or low voltage with the indication. - Battery: R03(1.5V) x 2 pcs
- HSF-7 Flyer
Type:HSE-7T1 High and Low Voltage Detector
- Working Voltage Range: AC 80V〜7000V
(50Hz/60Hz) - Compact enough to carry in the pockets of working clothes.
- Replaceable contact tip made of rubber.
- The function of identification the medium voltage
or low voltage with the indication. - Battery: LR44(1.5V) x 2 pcs
Type:HSE-7G High and Low Voltage Detector
- Working Voltage Range: AC 60V〜7000V
(50Hz/60Hz) - Working voltage range from AC60V as per Telecom
standard in Japan. - Compact enough to carry in the pockets of working clothes.
- Replaceable contact tip made of rubber.
- The function of identification the medium voltage
or low voltage with the indication. - Battery: LR44(1.5V) x 2 pcs
Type:HSS-25B1 High and Low Voltage Detector
- Working Voltage Range[Low]: AC 80V〜600V
(50Hz/60Hz)
Detect with your hand holding nameplate portion. - Working Voltage Range[high]: AC 3000V〜25000V
(50Hz/60Hz)
Detect with your hand holding the grip. - Telescopic type, Standard model for Medium
Voltage. - Battery: LR44(1.5V) x 2 pcs
- HSS-25B1 Flyer
Type:HSG-6 High and Low Voltage Detector
- Working Voltage Range: AC 80V ～ 7000V
(50Hz/60Hz) - Telescopic type, Light weight and Compact.
- Battery: LR44(1.5V) × 2 pcs
- HSG-6 Flyer
Type:HSN-6A1 High and Low Voltage Detector
- Working Voltage Range[AC] 100V〜7000V
(50Hz/60Hz) - Working Voltage Range[DC] 50V〜7000V
- May be used for voltage detection of a low-voltage circuit if holding the name plate of hte detecting part.
- Recommended for Withstand Voltage Test.
- Discriminate AC and DC.
- Checking residual electric charge, and discharge it.
- Battery: LR44(1.5V) x 2 pcs
- HSN-6A1 Flyer
Type:HST-1.5N High Voltage Detector
- AC 600 V - 7kV (50Hz/60Hz)
DC 600 V - 7kV - Non Ball joint
- Audio-signaling and light emitting
- LR44(1.5V) x 2 pcs
- HST-1.5N Flyer
For high voltage to special high voltage
Type:HST-30 High and Special High Voltage Detector
- AC 3kV - 34.5kV (50Hz/60Hz)
- FRP is used for the insulating stick. It is of lightweight and has outstanding operability.
- Tip metal fitting consists of a shock-absorbing spring.
- LR44(1.5V) x 2 pcs
- HST Series Flyer
Type:HST-20N High and Special High Voltage Detector
- AC 3kV - 25kV (50Hz/60Hz)
DC 3kV - 25kV - Non Ball joint
- Audio-signaling and light emitting
- LR44(1.5V) x 2 pcs
- HST-20N Flyer
Type:HS-90N High and Special High Voltage Detector
- AC 6kV - 90kV (50Hz/60Hz)
DC 6kV - 90kV - Non Ball joint
- Audio-signaling and light emitting
- 6R61 or 6F22(9V) × 1 pcs
- HS-90N Flyer
For special high voltage
Type:HST-70 Special High Voltage Detector
- AC 20kV - 80.5kV (50Hz/60Hz)
- FRP is used for the insulating stick. It is of lightweight and has outstanding operability.
- Tip metal fitting consists of a shock-absorbing spring.
- LR44(1.5V) x 2 pcs
- HST Series Flyer
Type:HST-170 Special High Voltage Detector
- AC 60kV - 195.5kV (50Hz/60Hz)
- FRP is used for the insulating stick. It is of lightweight and has outstanding operability.
- Tip metal fitting consists of a shock-absorbing spring.
- LR44(1.5V) x 2 pcs
- HST Series Flyer
Type:HST-250 Special High Voltage Detector
- AC 150kV - 287.5kV (50Hz/60Hz)
- FRP is used for the insulating stick. It is of lightweight and has outstanding operability.
- Tip metal fitting consists of a shock-absorbing spring.
- LR44(1.5V) x 2 pcs
- HST Series Flyer
Type:HS-500 Special High Voltage Detector
- AC 250kV - 550 kV (50Hz/60Hz)
- Non Ball joint
- Audio-signaling and light emitting
- 6R61 or 6F22(9V) x 1 pcs
- HS-500 Flyer
For railways
Railway product
- 1. Type:HVC-1.5N3
DC1500V Contact wire
2.Type:HVC-750N3
DC600V/750V/1500V Third rail
3.Type:HVC-1.5N3S
DC1500V Substation
4.Type:HVC-1.5N3M
DC600V/750V/1500V Monorail
Type:HVC-1.5N3 Voltage detector for DC overhead contact wire
- Voltage Detector for DC1500V Contact Wires,
Visualization of decreasing Residual Voltage - ■Features
・Light weight body[About half weight compared
with previous product.]
・Promote the checking before detect the voltage.
・Memolize the setting of volume control.
・Simplified the checking before detect the voltage.
・Adopt a strong Grounding magnet.
・Large Indication. - HVC-1.5N3 flyer
Type:HVC-750N3 Voltage detector for DC750V Third rail
- Voltage detector for DC750V Third rail
Visualization of decreasing Residual Voltage
■Feature
・Light weight body.
・The function of promoto the checking before
detect the voltage.
・Simple checking before detect the voltage.
・Flexible grounding wire and
strong grounding magnet.
・Large display.
・The function of checking that
the grounding wire is not broken. - HVC-750N3 flyer
Type:HST-L series HST-30L/HST-70L/HST-W80L Medium voltage & High voltage detecto
- Long length for Feeder
・HST-30L AC 3kV～34.5kV
・HST-70L AC20kV～80.5kV
・HST-W80L AC20kV～80.5kV - ■ Features
• FRP is used for the insulating stick. It is lightweight and outstanding in operability.
• Tip metal fitting consists of a shock-absorbing spring. - ■ Accessory
Bag for housing（DA14006） - HST-L Series Flyer
Type:HS-1.5NJ High Voltage Detector
- AC 6kV - 7kV (50Hz/60Hz)
DC 600V - 7kV - Non Ball joint
- Audio-signaling and light emitting
- 6R61 or 6F22(9V) × 1 pcs
- HS-1.5NJ / 1.5NJ1 Flyer
Type:HS-1.5NR High Voltage Detector
- AC 6kV - 7kV (50Hz/60Hz)
DC 1kV - 7kV - Non Ball joint
- Audio-signaling and light emitting
- 6R61 or 6F22(9V) × 1 pcs
- HS-1.5NR Flyer
Type:HST-W80JS Special High Voltage Detector
- AC 20kV - 80.5kV (50Hz/60Hz)
- Audio-signaling and light emitting
- LR44(1.5V) x 2 pcs
- HST-W80JS Flyer
Pinwheel type voltage detector
Type:WM series Pinwheel Voltage Detector
- AC 6.6kV - 275kV
- Battery-less voltage detector that operates by energy of the target of voltage detection