Highly conveninet

・Voltage detection through covering(sheath)
・Sensitivity adjustment

Desighned with user safety and security in mind

・Conductive rubber provides a high level of safety
・CAT III 1000V

Highly conveninet

・Voltage detection through covering(sheath)
・Sensitivity adjustment

Desighned with user safety and security in mind

・Conductive rubber provides a high level of safety
・CAT III 1000V

Led light type with more functions

・Built in LED light with auto power-off function
・The LED light also serves as a battery lever checker

Waterproof equivalent to IPX4

Extremely small and light weighted, so easy to handle and carry.

Voltage detection can be done by both light and sound, so no misconception happens.

Testing system is equipped to Voltage Detector itself.

By inner electric circuit, consumption is saved when not used.

Working voltage range from AC 60V as per Telecom standard in Japan Successor of HSC-7G (certified product as per NTT spec.)

Voltage detection from a remote place is possible by extending it

* Low voltage cannot be detected on stick extension mode.

Voltage detection from a remote place is possible by extending it

* Low voltage cannot be detected on stick extension mode.

It can be used for withstand voltage tests with high-voltage equipment.

It can be used up to 10.5 kVAC, 21 kVDC, only for application of withstand voltage test.

Discriminate AC and DC

Checking residual electric charge, and discharging it. (Refer to P.66.)

With 7-m grounding wire

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

FRP is used for the insulating stick. It is lightweight and outstanding in operability.

Tip metal fitting consists of a shock-absorbing spring.

Highest Voltage detection

Voltage detector for the highest voltage Transmission lines.

Positive indication

The device with flashing high luminous red LED light and intermittent distinct electronic buzzer sounding easy to perceive in high daylight and noisy place.

Waterproof

The sensor is enclosed tightly, preventing failure due to dirt, water and other foreign objects.

New model with reduced weight of HS-20N

Wide range detection

It operates over wide range from medium voltage to high voltage.

Positive indication

The device with flashing high luminous red LED light and intermittent distinct electronic buzzer sounding easy to perceive in high daylight and noisy place.

Waterproof

The sensor is enclosed tightly, preventing failure due to dirt, water and other foreign objects.

Battery-less voltage detector operating with energy to be detected.

This product is for AC current, and it indicates the presence of charge in circuits with an electronic buzzer that is easy to hear and a high-luminance light emitting diode. It is light-weight and easy to handle.

This product is for AC current, and it indicates the presence of charge in circuits with an electronic buzzer that is easy to hear and a high-luminance light emitting diode. It is light-weight and easy to handle.

This product is for AC current, and it indicates the presence of charge in circuits with an electronic buzzer that is easy to hear and a high-luminance light emitting diode. It is light-weight and easy to handle.

FRP is used for the insulating stick. It is of light-weight and has outstanding operability.

Universal joint type

FRP is used for the insulating stick. It is of light-weight and has outstanding operability.

Universal joint type

FRP is used for the insulating stick. It is of light-weight and has outstanding operability.

Universal joint type

Customizable tips:

Tip fittings can be changed to hook type,straight type,Y-shaped type, etc

Multi-functional display:

It has a 3-step light and sound function to notice approching the target voltage in a non-contct state.
In addition,when the detector is applied to the changing point,the lamp lights up in red to indicate the detector result in an easy-to-understand manner.

Universal joint:

Universal joint type for easy connection to shared control rods.

This product emits light and sounds in four stages depending on the voltage of the object.